Next Level Racing GTElite Manual De Instrucciones De Montaje página 12

support@nextlevelracing.com
25
Align the Seat Brackets with the T-Nuts previously installed in STEP 22.
26a
Bolt through the Seat Brackets and secure using 4 x M8 Bolts and Washers.
OVER-HANGING SEAT BRACKET
( )
FOR TALLER USERS
26b
Slide the front Seat Slider Member backwards and align the front slots on the Seat Brackets with the
T-Nuts previously installed in STEP 22.
PARTS:
• • Seat Brackets
PARTS:
• • 4 x M8 16mm Bolts
Repeat
on Other
Side
• • 4 x M8 Washers
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
22
OVER-HANGING SEAT BRACKET
( )
FOR TALLER USERS
26c Align the first rear slot on the Seat Brackets with the T-Nuts previously installed in STEP 22. Bolt
through and secure with 4 x M8 Bolts and Washers.
27 Align the holes on the Buttkicker pole with the T-Nuts previously installed in STEP 22. Bolt through
and secure with 2 x M8 Bolts and Washers.
SHIFTER INSTALLATION
Note: Install T-Nuts on the
Left Vertical Post for a Left
Side Shifter setup.
28
Install 4 x T-Nuts into the outer channel of the Left or Right Vertical Post.
Video Instruction: bit.ly/nlrbuild
PARTS:
Repeat
on Other
• • 4 x M8 16mm Bolts
Side
• • 4 x M8 Washers
SIDE VIEW
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
PARTS:
• • 4 x T-Nuts
23