Next Level Racing GTElite Manual De Instrucciones De Montaje página 9

support@nextlevelracing.com
SIDE MOUNT ASSEMBLY
) )
A B
14a A) Align the holes on the Spacer Plates with the mounting holes on the Wheel Base.
B) Both through and secure using 4 x M8 Countersunk Bolts.
Note: Use level provided to ensure
the Wheel Assembly is kept flat during
installation to avoid skewing.
14b Align the Side Mount Bracket holes with the slots on the Mounting Arms. Bolt through and secure
using 4 x M8 Low Profile Bolts, Nylon Washers and Flange Nuts.
Note: Do not fully tighten the Bolts until the Wheel
Assembly is set in the desired position.
14c
Align the holes on the Wheel Base assembly with the mounting holes on the Side Mount Brackets.
Bolt through and secure with 4 x M8 Low profile Bolts and Nylon Washers.
PARTS:
• • Spacer Plates
• • 4 x M8 20mm Countersunk Bolts
PARTS:
• • Side Mount Brackets
• • 4 x M8 25mm Low Profile Bolts
• • 4 x M8 Nylon Washers
• • 4 x M8 Flange Nuts
Note: Do not fully tighten the Bolts until the Wheel
Assembly is set in the desired position.
PARTS:
• • 4 x M8 14mm Low Profile Bolts
• • 4 x M8 Nylon Washers
16
SIDE MOUNT ANGLE ADJUSTMENT
14d Loosen the Bolts securing the Wheel Base assembly to the Side Mount Brackets. Adjust to the desired
angle and tighten the Bolts to lock in place.
SIDE MOUNT BRACKET ADJUSTMENT
14e Loosen the Bolts securing the Side Mount Brackets to the Mounting Arms. Adjust to the desired
position and tighten the Bolts to lock in place.
WHEEL ASSEMBLY HEIGHT ADJUSTMENT
Repeat
on Other
Side
Note: Support the Wheel Assembly while
adjusting to prevent it from slipping.
14f Loosen the Bolts securing the Mounting Arms to the Vertical Posts. Adjust to the desired position and
tighten the Bolts to lock in place.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • NIL
PARTS:
• • NIL
PARTS:
• • NIL
17