Next Level Racing GTElite Manual De Instrucciones De Montaje página 8

support@nextlevelracing.com
13a Install 2 x T-Nuts into the front channel and 2 x T-Nuts into the back channel of the Left Vertical Post.
Repeat for the Right Vertical Post.
) )
A B
Felt Pads
Repeat
Note: Use level provided to ensure
on Other
the Wheel Assembly is kept flat during
Side
installation to avoid skewing.
A) Install Felt Pads to the Mounting Arms.
13b
B) Align the holes on the Mounting Arms with the T-Nuts previously installed in STEP 13a. Bolt through and secure with 4 x M8
Bolts and Washers. Repeat on the other side.
FRONT MOUNT ASSEMBLY
(SKIP TO STEP 14a FOR SIDE MOUNT ASSEMBLY)
)
A B
13c A) Align the slots on the Front Mount Bracket with the mounting holes on your Front Mount Wheel Base.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
PARTS:
• • 8 x M8 T-Nuts
PARTS:
• • Mounting Arms
• • 8 x M8 16mm Bolts
• • 8 x M8 Washers
• • 4 x Sticky Felt Pads (90mm x 10mm)
PARTS:
• • Front Mount Bracket
)
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
14
)
A B
13d A) Align the Side Mount Brackets holes with the threaded inserts on the Front Mount Brackets.
B) Bolt through and secure with 2 x M8 Low Profile Bolts and Nylon Washers. Repeat on other side.
Note: Use level provided to ensure
the Wheel Assembly is kept flat during
installation to avoid skewing.
13e Align the Wheel Base Assembly with the slots on the Mounting Arms. Bolt through and secure with
4 x M8 Low Profile Bolts, Nylon Washers and Flange Nuts.
FRONT MOUNT ANGLE ADJUSTMENT
13f Loosen the Bolts securing the Side Mount Brackets to the Wheel Front Mount Plate. Adjust the Wheel
Base to the desired angle and tighten the Bolts to lock in place.
Video Instruction: bit.ly/nlrbuild
PARTS:
• • Side Mount Brackets
)
• • 4 x M8 14mm Low Profile Bolts
Repeat
on Other
Side
• • 4 x M8 Nylon Washers
PARTS:
• • 4 x M8 25mm Low Profile Bolts
• • 4 x M8 Nylon Washers
• • 4 x M8 Flange Nuts
PARTS:
• • NIL
15