Add Up "Weight - KERN CXB Serie Manual De Instrucciones

10.2 Add up "weight"

Place weight on weighing plate.
118. 3
a
PRE-
TARE
The display value is added to the summation memory by pressing the
-----
a
PRE-
TARE
The [ ] display next to "M+" indicates the stored value. After dead stop control was
carried out the balance will return automatically to counting mode.
118. 3
a
PRE-
TARE
118. 3
a
PRE-
TARE
Place goods to be weighed for second weighing and add to memory.
Repeat sequence of operations, as required. Please note that the balance must be
unloaded between the individual weighing procedures.
This process can be repeated 99 times or until the weighing range of the balance is
exhausted.
Display of you saved weighing data:
With balance unloaded, press the
The total weight as well as the number or weighings will pop up for 3 sec.
118. 3
a
PRE-
TARE
Total weight placed on
balance
Information:
Turning off the balance will result in a loss of all stored values.
30
0
ADD
1
0
key:
1
Number weighing
processes
M+
key.
M+ -----
100
M+
M+
M+
CXB/CXP-BA-e-0812
0
0
0