• To slide the seat forward, undo EACH snap and reattach the webbing to the underside of the seat
pad using the Velcro® attachments.
• Position the canopy to its most forward position.
• To unlatch the buckle press the center button and remove both latch posts.
• Have the child sit on the bench seat facing backward with their feet on the platform.
• You may need to adjust the recline position of the seat to allow for more room for the child to sit.
• Place the crotch strap between the child's legs.
• Push the waist latch posts into the crotch buckle until all parts snap into place. (22)
• Adjust the seat belt to be snug around the child's waist.
• Be sure that BOTH of the child's feet are fully on the platform at all times.
• Be sure that BOTH of the child's hands are holding the stroller frame.
I WARNING:
canopy as a hand hold.
Storage Basket
• The maximum weight that can be carried in the storage basket is 15 lbs (6.8 kg).
Installing the Parent Organizer
• Loop one strap of the parent organizer around one side of the handlebar and loop the rest of the
strap back around the handlebar to attach the Velcro®. (23)
• Repeat for the other side. Ensure the parent organizer is secure.
I WARNING:
Stroller. NEVER carry hot beverages or open containers in this product.
Maximum weight for Organizer is 5 lbs. (2.3 kg).
Folding the Stroller
• Keep children away from stroller while folding.
• Remove any infant car seat. The stroller can be folded with the infant car seat adapter in place.
• Close the canopy and push it forward.
• Put the front seat into the most upright position.
• Make sure both rear wheel brakes are set to their locked positions.
• Lock BOTH front wheel sets in place with locking levers facing forward.
• Unlock the safety latch on the lower left side of the stroller.
• Pull upward on the trigger mechanisms on both sides of the stroller and push the handlebar fully
forward. (24)
CAUTION: While folding the stroller, be careful to keep your fingers from being pinched by moving
parts.
• Engage the fold lock on the right side of the stroller over the mounting post. (25)
I WARNING:
when folding. Possible pinching hazard - Be careful when folding the
stroller.
Using the Stroller with an Infant Car Seat
• NOTE: See insert for a list of specific compatible car seat models.
• Remove the front tray and install the infant car seat adapter on the same mounts. Ensure it is
secure on BOTH sides. (26)
• Push the canopy to its most rearward position.
• ADJUST THE SEAT TO ITS SECOND (MIDDLE) POSITION.
• Remove the infant car seat from its base and place it onto the front seat of the stroller so it is in a
NEVER allow a rear seated child to use the
For use ONLY on the Joovy Caboose UL
ALWAYS keep children away from the stroller
9