Cleaning And Maintenance - Domo DO7295S Manual De Instrucciones

CLEANING AND MAINTENANCE

EMPTYING AND CLEANING THE DUST RESERVOIR
Empty the dust reservoir regularly. Make sure that the dust in the dust reservoir does not exceed the
maximum level.
1. Hold the handle of the dust container and press the button to remove the dust reservoir (A).
Carefully remove the dust container from the vacuum cleaner with an upward movement (B).
2. Remove the cover of the dust reservoir and tip the dust into a dustbin.
3. If necessary, wipe the dust reservoir clean with a soft, damp cloth.
4. Replace the dust container in the vacuum before using the vacuum again.
To prevent losing suction after emptying the dust container, it is essential that the filter be cleaned
regularly.
1. Remove the filter from the dust container.
2. Remove the sponge and clean both parts thoroughly under running water. Allow them to dry
completely before replacing them in the vacuum cleaner.
CLEANING OR REPLACING THE HEPA FILTER IN FRONT OF THE AIR OUTLET
1. At the back of the appliance there is a grille for the HEPA filter. You can easily remove it by pushing
to the left on the cover and taking the grille out of the appliance.
2. You remove the HEPA filter from the appliance by pressing the button on top of the filter and pulling
it towards you. Clean the filter under running water or replace it if necessary.
3. Make sure that the parts are completely dry before replacing them in the vacuum and the using the
appliance again.
32
DO7295S
A
B
1
1
1
2
2