Ego Power+ PTX5100 Manual Del Operador página 11

TROUBLESHOOTING
PROBLEM
Hedge trimmer doesn't
work.
Excessive vibration or
noise.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.
CAUSE
◾
No electrical contact between the trimmer
and battery.
◾
The battery pack is depleted.
◾
The battery pack or tool is over-
temperature protection
◾
The blade is jammed.
◾
Dry or corroded blades.
◾
Blades or blade support is bent.
◾
Bent or damaged teeth.
◾
Loose blade bolts.
56-VOLT LITHIUM-ION HEDGE TRIMMER ATTACHMENT — PTX5100
SOLUTION
◾
Remove battery, check contacts and
reattach the battery pack.
◾
Charge the battery pack.
◾
Allow the battery pack or power pole
to cool until the temperature drops
below 67°C.
◾
Remove the battery pack from the
tool. Remove the obstruction carefully
and then reinsert the battery and
restart the tool.
◾
Lubricate the blades.
◾
Replace with a new blade or support
following the section" REPLACING THE
BLADE" in this manual or contact EGO
service center for replacement.
◾
Replace with a new blade following
the section" REPLACING THE BLADE"in
this manual or contact EGO service
center for replacement.
◾
Tighten the blade bolts. Using a hex
wrench (not included), turn the bolt
clockwise to tighten.
EN
11