Ego Power+ PTX5100 Manual Del Operador página 6

EN
cm Centimeter
kg Kilogram
Direct
Current
HEDGE TRIMMER SAFETY WARNINGS
◾
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
◾
Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
◾
When transporting or storing the hedge trimmer,
always fit the blade cover. Proper handling of the
hedge trimmer will decrease the risk of personal injury
from the blades.
◾
When clearing jammed material or servicing the
unit, make sure all power switches are off and
the battery pack is removed or disconnected.
Unexpected actuation of the hedge trimmer while
clearing jammed material or servicing may result in
serious personal injury.
◾
When clearing jammed material or servicing the
unit, make sure all power switches are off and the
lock-off is in the locked position. Unexpected actuation
of the hedge trimmer while clearing jammed material or
servicing may result in serious personal injury.
◾
Hold the hedge trimmer by insulated gripping
surfaces only, because the blade may contact
hidden wiring. Blades contacting a "live" wire may
make exposed metal parts of the hedge trimmer "live"
and could give the operator an electric shock.
◾
Keep all power cords and cables away from cutting
area. Power cords or cables may be hidden in hedges
or bushes and can be accidentally cut by the blade.
◾
Do not use the hedge trimmer in bad weather
conditions, especially when there is a risk of lightning.
This decreases the risk of being struck by lightning.
ADDITIONAL SAFETY INSTRUCTIONS FOR
EXTENDED-REACH HEDGE TRIMMERS
◾
To reduce the risk of electrocution, never use the
extended-reach hedge trimmer near any electrical
power lines. Contact with or use near power lines
may cause serious injury or electric shock resulting
in death.
◾
Always use two hands when operating the
extended-reach hedge trimmer. Hold the extended-
6
56-VOLT LITHIUM-ION HEDGE TRIMMER ATTACHMENT — PTX5100
Length or size
Weight
Type or a characteristic of
current
reach hedge trimmer with both hands to avoid loss of
control.
◾
Always use head protection when operating the
extended-reach hedge trimmer overhead. Falling
debris can result in serious personal injury.
◾
Check the hedge for foreign objects before
operating, e.g. wire fences and hidden wiring.
◾
Hold the power tool by insulated gripping surfaces only.
◾
The hedge trimmer is intended to be used by the
operator at ground level and not on ladders or any
other unstable support
◾
Use only with the battery packs and chargers listed
in Fig.A2
SAVE THESE INSTRUCTIONS
ADDITIONAL SPECIFIC SAFETY RULES CAN BE
FOUND IN THE APPLICABLE ATTACHMENT'S
OPERATOR'S MANUAL.
SPECIFICATIONS
Blade Length
Cutting Capacity
Recommended Operating
Temperature
Recommended Storage
Temperature
Weight
Measured sound power
level L
WA
Sound pressure level at
operator's ear L
PA
Guaranteed sound power level
L (measured according to
WA
2000/14/EC)
Front handle
Valuation of
vibration a
h
Rear handle
◾
The above parameters are tested and measured
equipped with power pole PPX1000;
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
510 mm
26 mm
-10°C-40°C
-20°C-70°C
2.67 kg
93.75 dB(A)
K=1.7 dB(A)
83 dB(A)
K=3 dB(A)
95 dB(A)
1.3 m/s
2
K=1.5 m/s
2
1.5 m/s
2
K=1.5 m/s
2