8.6 Selection printed edition
Use this function to select which data are sent via the RS232C interface.
To achieve this, follow the sequence of operations below: (is not valid for the data
transfer mode BAPr )
Switch-on the balance using the
Press the
key and keep it pressed until „UNIT" appears on the display.
Press the
key twice, in the display appears „LAPr".
Confirm by pressing the
Now it is possible to scroll forward in the available edition parameters using the
key, to scroll backward, use the
After actuating the
Use the
or the
After that the current state is saved using the
By that way the user can configurate his own data block, which then is sent to a
printer or to a PC.
Display
Status
„Hdr"
On / Off
„GrS"
On / Off
„Net"
On / Off
„tAr"
On / Off
„N7E"
On / Off
„PCS"
On / Off
„AUJ"
On / Off
„rqt"
On / Off
„FFd"
On / Off
26
key and wait for the „0" display.
key.
key.
key, the current state is displayed ( on / off ).
key to change the state.
Function
Edition of the headlines
Edition of the total weight
Edition of the net weight
Edition of the tare weight
Edition of the stored weight
Edition of quantity
Edition of the unit weight
Edition of the reference quantity
Edition of a page feeding
key and the menu is left.
CB/FCB-BA-e-0640