English / USA
7
3
2
1
Control handle on drive tube
Throttle trigger interlock (1)
Throttle trigger (2)
Slide control (3)
Positions of slide control
STOP-O (4) – engine off – the ignition is
switched off
# – normal run position (5) – the engine
is running or can start
START (6) - the ignition is switched on,
the engine can start
34
Symbol on slide control
h (7) – stop symbol and arrow – to stop
4
the engine, push the slide control in
direction of arrow on stop symbol (h ) to
STOP-O.
5
Starting
6
:
Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
:
While holding both levers in this
position
:
move the slide control to START
and hold it there.
:
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the starting
throttle position.
9
8
:
Set the choke knob (8):
g
For cold start to
For warm start to
e
even if engine has been running but
is still cold
:
Press fuel pump bulb (9) at least five
times – even if the bulb is already
filled with fuel.
FS 110