Steamfast SF-375 Guia Del Propietario página 14

STEAM MOPPING
NOTE: Be sure that Boiler has been filled and that all steam mopping accessories are
connected before following these steps.
It is recommended to sweep or vacuum hard floors before mopping.
1. Follow STEPS 1-3 of Steam Cleaning section above.
Refer to Page 9 for a listing of hard floor surfaces that are recommended for cleaning
with the Deluxe Canister Steam Cleaner.
2. For best results, use a steady back-and-forth motion over floor surface, pushing the Mop
Head away and pulling it back towards you. Work your way backwards over the floor, in
order to avoid walking over freshly mopped areas.
NOTE: To avoid warping or damage caused by heat and moisture, do not use on
unsealed hardwood or unglazed ceramic surfaces. Steam may remove the sheen from
some floors that have been treated with wax.
3. To effectively kill bacteria and microorganisms, repeatedly mop a single small area
(approximately 3' x 3' for best results) for at least 2 minutes.
4. The Microfiber Pad will absorb dirt and moisture during mopping. However, when you
are finished you may find some residual moisture has been left behind. In this case, it is
recommended to allow floor time to air-dry. A fan may be directed towards mopped area to
facilitate drying.
14 | ENGLISH
All manuals and user guides at all-guides.com