PROPER STORAGE
Preparing your Deluxe Canister Steam Cleaner for storage is quick and simple. When you have
finished your steaming tasks, follow the steps listed below.
1. Turn unit "Off" and unplug power cord.
2. Press and hold Steam Trigger to release all remaining steam.
3. Allow unit to completely cool (at least 30 minutes).
4. Remove all accessories from unit.
5. Carefully remove Boiler Cap.
6. Drain any remaining water from Boiler into a sink or tub – this will help to minimize mineral
build-up and prevent over-filling during your next use. Replace Boiler Cap loosely.
7. Store accessories. Utility Brushes can be conveniently stored in the On-board Accessory
Storage. Remaining accessories can be stored in the Storage Bag.
8. Store Deluxe Canister Steam Cleaner in a cool, dry location.
MINERAL BUILD-UP
A common maintenance need for steam appliances is the removal of build-up caused by
high mineral content in many municipal water supplies. This mineral build-up may limit the
effectiveness and reduce the life of your Deluxe Canister Steam Cleaner.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when
using your Deluxe Canister Steam Cleaner. If you are unable to use distilled water, it is
recommended that the following procedure be followed monthly to remove any
mineral build-up:
1. Turn unit "Off" and unplug power cord.
2. Allow unit to completely cool (at least 30 minutes).
3. Press and hold Steam Trigger to release all remaining steam.
4. Remove all accessories from unit.
5. Carefully remove Boiler Cap.
6. Drain water from Boiler into a sink or tub.
7. Using Measuring Cup, measure 8 oz. (237 ml.) of vinegar.
8. Slowly pour vinegar into Boiler.
9. Allow to stand for 40 minutes.
10. Drain vinegar from Boiler.
11. Rinse Boiler with fresh water, drain and repeat until vinegar odor dissipates.
12. Replace Boiler Cap.
All manuals and user guides at all-guides.com
Storage & Care
ENGLISH | 15