Steamfast SF-375 Guia Del Propietario página 8

STEAM MOPPING ACCESSORIES
WARNING: Do not try to connect accessories while unit is emitting steam.
EXTENSION WANDS
1. Select one of the Extension Wands. Insert end (A) of Wand onto Steam Nozzle (B) with
green lock/release button slightly off center with hole. Fully insert and rotate wand slightly to
allow button to snap into hole.
2. Using the same instruction, attach remaining Extension Wand (C) to the first Wand. Both
Extension Wands should now be connected to the Steam Nozzle.
MOP HEAD
1. Align Mop Head with open end of Extension Wand, so that hole in Mop Head aligns with
green lock/release button on Wand.
2. Press down on green lock/release button. While continuing to hold button down, slide Mop
Head onto Extension Wand (See figure 1-A). Fully insert and rotate wand slightly until button
snaps through hole (See figure 1-B).
NOTE: Do not use excessive force when mopping or using Extension Wands as this
may cause the Wands to break.
FIGURE 1
BRISTLE BRUSH ATTACHMENT
1. Align Mop Head with Bristle Brush Attachment, so that the
release tabs (A) on the Bristle Brush align with the sides of the
Mop Head (B).
2. Firmly press the Bristle Brush Attachment onto Mop Head until it
securely snaps into place.
Note: Do not use Bristle Brush Attachment with Microfiber or
Scrubbing Mop Pad.
8 | ENGLISH
All manuals and user guides at all-guides.com
Assembling Your Deluxe Canister
Steam Cleaner
C
A
A
B
B