Microlife SureFit WRSC Manual Del Usuario página 2

Important Product and Safety Information
Follow Instructions for Use. This document provides important
product operation and safety information regarding this blood
pressure monitor replacement cuff. Please read this document
thoroughly before using the component and keep for future ref-
erence.
This blood pressure cuff is a replacement to the cuff included with your
upper arm, Microlife produced, automatic blood pressure monitor. This com-
ponent is only for use with Microlife produced automatic (oscillometric)
blood pressure monitors, by adults, at home or in the doctor's office.
This replacement blood pressure monitor cuff IS intended to be used:
• As a replacement for your Microlife manufactured, automatic, blood pres-
sure monitor's cuff.
• Within a home healthcare environment; whereas the person being meas-
ured may be the user/operator.
• With the cuff located upon the user's upper arm; ½ inch above the elbow
over the artery as indicated on the cuff.
This replacement blood pressure monitor IS NOT intended for use with:
• Blood pressure monitors produced by other manufacturers than Microlife.
• Any body location other than that of the upper arm.
• Users under the age of 12.
WARNING – Potentially hazardous situation that if not avoided
may result in serious injury or death.
• Only use this component as a replacement to the cuff included in your
current Microlife produced, automatic, upper arm, blood pressure monitor.
For blood pressure measurements, continue to follow all instructions that
accompanied your original Microlife produced blood pressure monitor.
• Though not for use with children under 12, ensure that any children
around this component are supervised; some parts are small enough to be
swallowed and any present tubes or cables may provide a risk of strangu-
lation.
• Ensure the cuff tubing is not kinked during use as harmful injury may
occur due to the effect of blood flow interference caused by high pressure
in the cuff not releasing.
1