Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Page 10
ENGLISH
Select type of light installed (e.g., Jandy Colors
Jandy
LED Light ) and assign the light to an available
®
auxiliary relay.
Select Light Type:
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
>
More
Assign Selected Light to an Auxiliary:
SELECT LIGHT
SELECT LIGHT
Jandy Color
Jandy Color
Jandy LED
Jandy LED
• JC is displayed next to AUX if a Jandy Colors light
has been assigned.
• JL is displayed next to AUX if a Jandy LED Light
has been assigned.
• Press Select button with JC or JL highlighted to
toggle control by the auxiliary on or off.
7.6
Label Auxiliary Functions
INSTALL SETTINGS>LABEL AUX
Assign labels to auxiliary equipment to display text in the
user interface instead of AUX 1, 2, or 3.
INSTALL SETTINGS
INSTALL SETTINGS
INSTALL SETTINGS
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Color Lights
>
Color Lights
>
Color Lights
>
Temp Calibrate
>
Label Aux
>
Label Aux
>
Label Aux
>
Solar Priority
>
Temp Calibrate
>
Temp Calibrate
>
Temp Calibrate
>
Assign JVA
>
Solar Priority
>
Solar Priority
>
Solar Priority
>
>
Assign JVA
>
Assign JVA
>
Assign JVA
>
More
>
>
>
More
More
More
Label = Aux2
Label = Aux2
Label = Aux2
Label = Aux2
<Default>
Aerator
<Default>
<Default>
<Default>
Air Blower
Aerator
Aerator
Aerator
Backwash
Air Blower
Air Blower
Air Blower
Chlorinator
Backwash
Backwash
Backwash
Chlorinator
A-Z
Chlorinator
Chlorinator
More
More
More
More
• Choose from labels listed A-Z on each screen.
or
TM
SELECT LIGHT
Jandy Color
Jandy LED
Intellibrit
Color Logic
ASSIGN TO AUX
ASSIGN TO AUX
Jandy Color
Jandy Color
Aux1
JC
Aux1
JC
Aux2
Aux2
Aux3
Aux3
LABEL AUX
LABEL AUX
LABEL AUX
LABEL AUX
Aux1
>
Aux2
>
Aux1
>
Aux1
>
Aux1
>
Aux3
>
Aux2
>
Aux2
>
Aux2
>
Aux3
>
Aux3
>
Aux3
>
Label = Aux2
Label = Aux2
Label = Aux2
Label = Aux2
Swim Jet
Valve(s)
Swim Jet
Swim Jet
Swim Jet
Wtr Feature
Valve(s)
Valve(s)
Valve(s)
Waterfalls
Wtr Feature
Wtr Feature
Wtr Feature
Whirlpool
Waterfalls
Waterfalls
Waterfalls
Whirlpool
Whirlpool
Whirlpool
More
More
More
More
Pool Automation Control | Owner's Manual
Polaris
PAC
®
™
7.7
Temp Calibrate
INSTALL SETTINGS>TEMP CALIBRATE
Adjust temperature displayed on the Polaris PAC up or
down by 4 degrees.
If the temperature is off by more than four
NOTE
(4) degrees, contact your local service
representative.
SYSTEM SETUP
SYSTEM SETUP
Label Aux
>
Label Aux
>
Temp Calibrate
>
Temp Calibrate
>
Solar Priority
>
Solar Priority
>
Assign JVA
>
Assign JVA
>
Color Light
>
Color Light
>
More
More
Back
Select
Back
Select
• Use Up/Down arrows to set new temperature
value.
7.8
Solar Priority (if applicable)
INSTALL SETTINGS>SOLAR PRIORITY
NOTE: You will only see this option if solar heating
is installed in your system.
Enable the system to use solar heat first, when
available. If solar heat is no longer available, the system
will automatically switch to the alternate heat source.
INSTALL SETTINGS
Color Lights
>
Label Aux
>
Temp Calibrate
>
Solar Priority
>
Assign JVA
>
>
More
• When solar and heater are enabled the solar will
heat the water until either the thermostat setting
has been reached or solar heat is no longer
available.
• If the solar panel is not hot enough, solar heat will
shut off and the other heat source (usually gas
heater) will take over to bring the water up to the
thermostat setting.
7.9
Assign JVA
INSTALL SETTINGS>ASSIGN JVA
NOTE: If the system is a pool/spa combination, without
solar, only the solar JVA is assignable. If the
system is a pool or spa only system, without
solar, all three JVAs are assignable. The
example shown is for a pool or spa only system
without solar.
TEMPERATURE
TEMPERATURE
CALIBRATE
CALIBRATE
Water: 74°F
Water: 74°F
Back
Select
Back
Select
SOLAR PRIORITY
Enable
Disable
Publicidad
Capítulos
Tabla de contenido
