Section 8. Main Menu; Equipment Status; Filter Pump; Pool Heater On/Off - Polaris PAC PAGAUT Manual Del Propietário

Page 12
ENGLISH

Section 8. Main Menu

From the Main menu, access commands to turn
equipment on/off, program scheduled times to turn
equipment on/off automatically, and view current operating
status for specific equipment in your configuration.
12:40PM

Filter Pump

Off
Temp Off
Aux 1 Off
Aux 2 Off
Aux 3 Off
Settings >
Devices >
Service Mode >
MAIN MENU
8.1

Equipment Status

If any of the equipment is currently enabled in your
system, the screen alternately displays the Main menu
and the Equipment Status screen.
12:40PM
Zodiac
Zodiac
12:40PM
Filter Pump On
12:40PM
Temp Off
Pool Mode On
Pool Mode On
Aux 1 On
Pool Heater 74°F
Pool Heater 74°F
Aux 2 On
Spa Mode Off
Spa Mode Off
Spa Heater Off
Spa Heater Off
Aux 3 Off
Settings >
Settings >
Settings >
Manual Control >
Manual Control >
Devices >
Service Mode >
Back
Select
Back
Select
8.2 Filter Pump
MAIN > FILTER PUMP
Turn on Filter Pump whenever you want to filter the pool.
Filter Pump enables the filter pump to circulate water
through the filter and pool heater.
12:40PM
JAUTPS/JAUTP
Filter Pump On
12:40PM
Temp Off
Pool Mode On
Aux 1 Off
Pool Heater 80°F
Aux 2 Off
Settings >
Aux 3 Off
Devices >
Settings >
Service Mode >
Devices >
Service Mode >
• When Filter Pump is activated, the Equipment
Status menu is displayed indicating the Filter
Pump is ON.
JAUTPS/JAUTP
12:40PM
Pool Mode
Pool Heater
Settings
Devices
Service Mode
JAUTPS/JAUTP
12:40PM
Pool Mode
Pool Heater
Settings
Devices
Equipment Status
Equipment Status
Service Mode
Filter Pump
Filter Pump
Aux1
Aux1
Aux2
Aux2
Back
Select
Back
Select
Equipment Status
Filter Pump
Pool Automation Control | Owner's Manual
Polaris PAC
®
™
8.3

Pool Heater On/Off

Filter Pump
Aux1
MAIN > POOL HEATER
Aux2
Enable the heater for the pool. Heater will turn on
automatically as long as the filter pump is on and the
water temperature is below the temperature set point.
12:40PM
Settings >
Devices >
Service Mode >
Off
Off
>
>
>
12:40PM
Settings >
Devices >
Service Mode >
Off
80°F
>
• Increase or decrease current pool temperature by
>
pressing Select to highlight the setting. Press Up/
>
Down arrows to increase or decrease temperature.
• To turn pool heater OFF, press Select when Pool
Heater is highlighted in the Main menu.
8.4

Turn Aux1, Aux2 or Aux3 On/Off

MAIN > AUX1, AUX2, AUX3
If you have assigned labels to auxiliary
NOTE:
equipment, the label will be displayed in the
Main menu.
Turn ON or OFF auxiliary equipment, for example pool
lights, salt chlorinator, or UV system.
12:40PM
Pool Mode Off
Temp 1 Off
Aux1 Off
Aux2 Off
Aux3 Off
Settings >
Devices >
Service Mode >
Settings
Clock
Schedule
POOL HEAT
Enabled
Set to: 75°F
12:40PM
Pool Mode Off
Temp 1 Off
Aux1 On
Aux2 On
Aux3 On
Settings >
Devices >
Service Mode >
Chlor Output
Pool 20%
Spa 10%