Data Transfer; Connection To A Printer; Data Transfer To A Personal Computer; Internet Updates - Tintometer Lovibond TB 300 IR Instrucciones

Mode-Function
Signal beep
Storage
Storage code no.
Storage date
System info
The selected settings are kept by the instrument even when switched off. To change
instrument settings a new setting is required.

2.5 Data transfer

Switch the instrument and the personal computer or printer off. Connect the instrument
(RS232 interface) and the serial interface of the personal computer or printer using a cable in
line with the specified assignment (see technical data). The cable for connection to a personal
computer is included in delivery contents.

2.5.1 Connection to a printer

Printer with a serial connection are suitable for connection with the instrument
(see chapter 3.4 Technical data interface).
A suitable paper tabel printer is the printer DPN 2335.
Before using the printer DPN 2335 with the insrument you should change the following
standard adjustments:
(Detailed information of changing the adjustment you will find in the printer manual).
Baud-rate:
Parity:
Data bits:
Note: The printer must be connected and switched on before printing.

2.5.2 Data transfer to a personal computer

Transferring test results from the instrument to a personal computer requires a transfer pro-
gram, e.g. HyperTerminal.
Please find detailed information at our homepage on the download-area.

2.5.3 Internet Updates

It is possible to update new software applications and additional languages via the internet.
Please find detailed information at our homepage in the download-area.
Please Note:
To prevent loss of stored test results store or print them out before performing an Update.

3.1 Unpacking the instrument

Carefully inspect all items to ensure that every part of the list below is present and no visible
damage has occurred during shipment. If there is any damage or something is missing, please
contact your local distributor immediately.
50
No. Description
14 Switching the acoustic signal on/off to indicate end of
reading
30 Displaying all stored results
32 Displaying only results of a selected code no. range
31 Displaying only results of a selected time period
91 Information about the instrument e.g. current software
version
9600
None
8
TB300 IR 6 03/2022