Operating Temperature - ABAC XPN 015 Manual Del Usuario

USE ONLY GENUINE REPLACEMENT PARTS
19
For any operating and/or replacement problems of the
parts, contact your dealer. Replacement parts which
are not original may void your warranty and can lead
to malfunction and resulting injuries. Genuine parts are
available from your dealer.
DO NOT MODIFY THE COMPRESSOR
20
Do not modify the compressor. Always contact the
authorized service center for any repairs. Unauthorized
modification may not only impair the compressor
performance but may also result in accident or injury
to repair personnel who do not have the required
knowledge and technical expertise to perform the
repair operations correctly.
TURN OFF THE PRESSURE SWITCH WHEN THE
21
COMPRESSOR IS NOT IN USE
When the compressor is not used, turn the knob of the
pressure switch OFF "0", disconnect it from the power
source .
DO NOT DIRECT AIR STREAM AT BODY
22
Risk of injury, do not direct air stream at persons or
animals.
7
OK!
NO!
1. FOREWORD
DO NOT STOP COMPRESSOR BY PULLING OUT THE
23
PLUG
Use the "O/I" (ON/OFF) knob of pressure switch.
PNEUMATIC CIRCUIT
24
Use recommended pipes, pneumatic tools that
withstand a pressure greater than or equal to the
maximum operating pressure of the compressor.

OPERATING TEMPERATURE

25
With arrival of the winter season (Fig. 4) remove
(if installed outdoors) the compressor from the
wall support and place it in a covered and heated
environment, to avoid subjecting it to an overly harsh
temperature.
DO NOT WIPE PLASTIC PARTS WITH SOLVENT
26
Solvents such as gasoline, thinner, benzene, carbon
tetrachloride, and alcohol may damage and crack
plastic parts. Do not wipe them with such solvents.
Wipe plastic parts with a soft cloth lightly dampened
with soapy water and dry thoroughly.
8
EN
NO!
H O
2
OK!
15