After the product has been fully configured,
a restart is required.
u Click the "Restart" button to restart the
product.
7.4.4 Changing the charging mode
If during configuration, solar charging has been ac-
tivated via the SEMP interface (qualified electrician
required), one of 3 different charging modes can be
selected.
1 Description of charging modes: "3.7 Solar char-
ging modes" [} 11]
u In the user web interface, navigate to the "Load
Management" menu and set the "Charging
Mode" parameter.
Changing the charging mode can also take place
while a charging process in progress.
7.4.5 Exporting charging statistics
In the "Dashboard" menu, the charging statistics
can be exported in the CSV format.
u Click the "Download" button under "Download
Session Report:".
Requirement(s):
ü A time server is specified.
1 "7.4.6 Specifying a time server" [} 41]
7.4.6 Specifying a time server
A valid time is required for some functions (e. g. to
export charging statistics or for making manual set-
tings for solar charging). For these purposes, a time
server must be specified.
Requirement(s):
ü The product has been connected to the net-
work via an internet capable router.
ü The router is permanently connected to the in-
ternet.
u Navigate to the menu "Network" > "NTP" and
make the following parameter settings:
Parameter
NTP client
NTP server 1 configura-
tion
Additional time servers can be entered if necessary.
They are called upon if the connection to the first
time server is interrupted.
7.4.7 Whitelist management
Programming RFID cards
u Navigate to the menu "Whitelists" > "Add entry".
u Hold the RFID card in front of the RFID card
reader to transmit the UID of the RFID. Alternat-
ively, the RFID UID can be entered manually.
u Click the "Add entry" button.
A list with all the UIDs of the RFIDs can also be ex-
ported or imported.
Setting
u Select "On".
u Enter the URL of the
time server, e. g.
n ntp.elinc.de
n ptbtime1.ptb.de
EN
41