Sub-Zero Designer Serie Guía De Uso Y Cuidado página 10

Storage
Storage Drawers
DRAWER DIVIDERS (TALL MODEL)
To reposition a drawer divider:
To move a short divider, slide the divider forward or
1
backward. Refer to the illustration below.
One long divider in the top drawer is adjustable. To
2
remove a long divider, pull the long divider up until it
stops, rotate counterclockwise, then pull upward.
To install a long divider, align the grooves with the
3
drawer tabs, rotate clockwise, then slide down.
SHORT DIVIDER
Drawer dividers
10 | Sub-Zero Customer Care 800.222.7820
DRAWER REMOVAL (TALL MODEL)
To remove/install a storage drawer:
To remove, pull the drawer open until it stops. Raise the
1
front of the drawer slightly and pull straight out. Refer
to the illustration below.
2 To install, raise the front of drawer and place onto the
slides. Align the back of the drawer with hooks on the
slide, then align the white pegs at the front of the slide
with holes at the front of the drawer.
Drawer removal