Kitchen Timer; Weight Defrost - Danby DBMW0924BBS Manual Del Propietário

OPERATING INSTRUCTIONS

KITCHEN TIMER

To set the timer:
1. Press the Kitchen Timer button.
2. Use the number pad to enter the desired time to
run the timer. The maximum time is 99 minutes
and 99 seconds.
3. Press the Start/+30SEC button to begin timer
operation.
Note: Programs cannot be set while the timer is
running.

WEIGHT DEFROST

The defrosting time and power level are adjusted
automatically once the weight is entered.
1. Press the Weight Defrost button. The display will
show "dEF1".
2. Use the number pad to enter the weight of the
food that will be defrosted between 4 ~ 100 oz.
3. Press the Start/+30SEC button to confi rm.
TIME DEFROST
1. Press the Time Defrost button. The display will
show "dEF2".
2. Use the number pad to enter the desired
defrosting time. The maximum time is 99 minutes
and 99 seconds.
3. The default power level is 3, 30%. The display
will show "PL3".
4. To change the power level, press the Power
button and then press the number pad for the
desired power level.
5. Press the Start/+30SEC button to confi rm.
MEMORY
The memory feature allows you to program cooking
times and powers that can be recalled and used
with minimal input. Three memory programs can be
set at one time, they are labeled 1, 2 and 3.
To set Memory 1:
1. Press the 0/Memory button once. The number 1
will display.
2. Press the Time Cook button and then use the
number pad to enter the desired cook time.
3. Press the Power button once. The power level
will default to 100%. "PL10" will display. To
change the power level, use the number pad to
enter the desired power level.
4. Press the Start/+30SEC button to save the
setting.
5. To use the setting in future, press the 0/
Memory button once and when the number 1
is displayed, press the Start/+30SEC button to
begin operation.
To set Memory 2 or 3, press the Memory button two
or three times until the number 2 or 3 are displayed
and then follow the steps above.
Note: If the power is lost or the microwave is
unplugged, the memory settings will need to be
reprogrammed.
SETTING THE CONTROL PANEL LOCK
To set the control panel lock press and hold the Stop
button for 3 seconds. The microwave will beep to
indicate that the lock is activated. While locked, the
microwave cannot be used.
To cancel the control panel lock, press and hold the
Stop button for 3 seconds. The microwave will beep
to indicate that the lock has been deactivated.
12