Install The Battery Pack; Remove The Battery Pack; Operation; Use The Spray Gun - GreenWorks Pro PW60L00 Manual Del Usuario

4. Lift and push down the bucket buckles to fix the bucket
(4) to the base.
WARNING
Pull the bucket buckles to unlock the bucket.
8.5

INSTALL THE BATTERY PACK

18
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Open the battery door.
2. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
8.6

REMOVE THE BATTERY PACK

1. Open the battery door.
2. Push and hold the battery release button (18).
3. Remove the battery pack from the machine.
9

OPERATION

WARNING
Make sure that all the connections are tight and have no
leakage before operation.
English
9.1

USE THE SPRAY GUN

For safe control, keep your hands on the spray gun and
wand at all times.
• Pull and hold the spray gun trigger (10) to start the
machine.
• Release the spray gun trigger (10) to stop water flow
through the nozzle (19).
9.1.1 UNLOCK THE GUN TRIGGER
• Push backward the trigger safety button (14).
9.1.2 LOCK THE GUN TRIGGER
• Push forward the trigger safety button (14).
9.2

INSTALL THE NOZZLE

20
Before you change the nozzle:
1. Pull the spray gun trigger (10) to release water pressure.
2. Lock the trigger safety button (14) on the gun.
3. Stop the mahcine.
Do not point the spray wand (8) at your face or others'.
1. Pull back the quick-connect collar on the spray wand (8).
2. Install the nozzle (19) onto the spray wand (8).
3. Release the quick-connect collar to attach the nozzle (19).
9
WARNING
19
WARNING
WARNING
EN