Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
9.2.1
NOZZLE TYPE
SPRAY TIP
APPLICATION
Yellow - Narrow fan tip (15° )
•
15
O
White - Wide fan tip (40° )
•
40
O
10
INSTALL THE DETERGENT
TANK
21
Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
Do the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
The yellow pressure washer tip pro-
vides high versatility with its 15 de-
gree angle tip. Referred to as the
washing tip, because it provides ade-
quate pressure to remove dirt from
surfaces, but is designed to not dam-
age many surfaces. This pressure
washer tip is designed for "sweep-
ing" foliage or debris given its wide
angle. This tip is versatile due to its
wide area of cleaning and strong
pressure application.
The white 40 degree tip, referred to
as the "fan" tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
9
WARNING
WARNING
NOTE
English
1. Put the detergent into the detergent tank (21).
2. Install the detergent tank onto the spray gun (9).
3. Turn counter-clockwise the spray gun (9) to tighten.
Do not let detergent dry on the surface to prevent streaks.
11
START THE MACHINE
Do not operate without the water supply connected.
Before you start the machine:
1. Turn the water supply on.
2. Pull the spray gun trigger (10) to release air pressure.
3. If a stable stream of water come into view, release the
gun trigger (10).
1. Set the power switch to the "ON" ( | ) position.
2. Pull the spray gun trigger (10).
12
STOP THE MACHINE
1. Release the spray gun trigger (10).
2. Set the power switch to the "OFF" (O) position.
If you do not use the machine：
•
Stop the machine.
•
Turn the water supply off.
•
Remove the battery pack.
•
Pull the spray gun trigger (10) to release the remaining
pressure from the machine.
•
Lock the trigger safety button (14).
10
NOTE
CAUTION
CAUTION
WARNING
Publicidad
Capítulos
Tabla de contenido
Solución de problemas
