Storage; Troubleshooting - Silvercrest SPO 910 A1 Instrucciones De Uso

Clean the baking tray 4, the pizza peels 8 and the dough cutter 9 in
■
warm soapy water. If the parts are heavily soiled, you can soak them a little.
Dry all the parts thoroughly after cleaning.
NOTE

Storage

■ After it has cooled down, store the cleaned appliance and accessories in a
dust-free and dry location. Do not store the terracotta dome 2 in an enc-
losed space, but rather somewhere where the air can circulate freely.

Troubleshooting

Fault
The appli-
ance is not
working.
If the malfunction cannot be corrected using one of the suggestions above, or
if you have found some other kind of malfunction, please contact our Customer
Service department.
SPO 910 A1
For gentle cleaning, we recommend hand washing. However, the
pizza peels 8, baking tray 4 and dough cutter 9 are also dish-
washer-safe. Place them in the top compartment of the dishwasher,
taking care not to trap any parts.
Cause
The plug is not connected to
the mains power.
The mains power socket is
defective.
The appliance is defective.
The thermal cut-out has been
triggered.
Solution
Insert the plug into a mains
power socket.
Use a different mains power
socket.
Contact the Customer Service
department.
Disconnect the plug from the
mains power socket and wait
until the appliance has cooled
down. If the appliance still does
not function after cooling down,
contact the Customer Service
department.
GB │ IE │
11 ■