Electrical Connections; Indicators; Alarms And Faults; Disposal - Roger Technology ACS/BA/60 Instrucciones Y Advertencias Para El Instalador

6
Electrical connections (pag. 12)
Perform the connections to the control unit as shown in
pag. 10-11.
Connect the green wire to one of the control inputs (AP,
CH, PP, PED or ORO), the brown wire to the +24 terminal
and the white wire to the COM terminal.
WARNING! ACTIVATE
INPUT (AP, CH, PP, PED OR ORO) TO THE19
PARAMETER ON THE CONTROL UNIT.
An indicator light can be connected to the SC output to
signal anomalies or, by connecting a relay, an error alert
contact may be made available at an external control
system (pag. 11).
For any other configurations or adjustments, refer to the
manual of the control unit CTRL, CTRL/P.
7

Indicators

TEST mode error alert
DISPLAY POSSIBLE CAUSE
Activated detachable
00 br
boom connection sen-
sor, or not connected,
or incorrect connection.

Alarms and faults

DISPLAY POSSIBLE CAUSE
Detachable boom
brEA
connection sensor in
alarm.
THE CONTROL
CORRECTIVE ACTION
Check the settings of
the 19 parameter.
Check the correct con-
nection of the system
to the control unit.
CORRECTIVE ACTION
Check the setting of the
19 param.
Check the correct con-
nection of the system
to the control unit.
Reconnect the boom.
Consider replacing the
boom if it is damaged.
8

Disposal

The product may only be uninstalled by
qualified technical personnel, following
suitable procedures for removing the product
correctly and safely. This product consists of
numerous different materials. Some of these
materials may be recycled, while others must
be disposed of correctly at the specific recycling or waste
management facilities indicated by local legislation
applicable for this category of product.
Do not dispose of this product as domestic refuse.
Observe local legislation for differentiated refuse
collection, or hand the product over to the vendor when
purchasing an equivalent new product.
Local legislation may envisage severe fines for the
incorrect disposal of this product.
Warning! Some parts of this product may contain
substances that are harmful to the environment or
dangerous and which may cause damage to the
environment or health risks if disposed of incorrectly.
9
Additional information and
contact details
ROGER TECHNOLOGY is the exclusive proprietor holder
of all rights regarding this publication.
ROGER TECHNOLOGY reserves the right to implement
any modifications without prior notification. Copying,
scanning or any alterations to this document are
prohibited without express prior authorised from by
ROGER TECHNOLOGY.
ROGER TECHNOLOGY CUSTOMER SERVICE:
business hours: Monday to Friday
08:00 to 12:00 - 13:30 to 17:30
Telephone no: +39 041 5937023
E-mail: service@rogertechnology.it
Skype: service_ rogertechnology
19