From The Carony To The Car - Autoadapt Carony Classic Modo De Empleo

6. From the Carony to the car

1. Preparing
Open the door and swivel the
Turnout, or Turny, fully outwards.
Release lever
4. Sliding the seat in
Push the release lever down and
slide the seat into the car. Allow the
user's feet to slide over the Carony's
chassis, protecting the head hitting
from the door post.
6. Loading the Carony manually
Remove the foot supports and fold the anti-tip
devices in. Bend your knees when lifting to avoid
back strain. Secure firmly during transport.
12
All manuals and user guides at all-guides.com
2. Height adjustment
Adjust to the correct docking
height with the crank on the
Carony, or with the Turny.
Fold the crank in after use.
Locking pin
Make sure that the locking
pins have locked firmly on
both sides of the Turnout, or
Turny.
The weight displacement means
that the product into which the
Carony docks and the Carony
are no longer on the same level.
Correct this by lowering the
Carony, or raising the Turny.
3. Docking onto the Carony
For a Turnout, Turny HD / Orbit
- brake the Carony after docking!
For a Turny Evo
- do not brake the Carony after
docking!
Pull on the Carony to ensure that
the units are locked firmly into one
another.
5. Releasing the Carony
Release the brakes. Push the
release lever down and pull the
units apart. Rotate the user into the
car using the Turnout or Turny.