Maintenance, Repair And Storage; Warnings And Instructions - Stihl MSA 120 C Manual De Instrucciones

English
– Unplug the power supply cord from the outlet when
the charger is not in use.
– Never jerk the power supply cord to disconnect it
from the wall outlet. To unplug, grasp the plug, not
the power supply cord.
– Do not use the power supply cord for any other
purpose, e.g., for carrying or hanging up the charger.
– Make sure the power supply cord is located or
marked so that it will not be stepped on, tripped over,
come in contact with sharp objects or moving parts,
or otherwise be subjected to damage or stress.
￭ An extension cord should not be used unless absolutely
necessary. Overloading an extension cord can result in
overheating and fire. If an extension cord must be used:
– Use only a properly wired 16 gauge (AWG 16) or
heavier gauge extension cord.
– Never connect more than one charger or other
device to an extension cord.
– Never use an extension cord with a wattage rating
lower than the wattage on your charger's rating
plate.
– Never use an extension cord if the blades on its plug
are different from the blades on the charger plug in
number, size or shape.
– Do not link (chain) extension cords.
￭ In case of fire, or if the charger or the battery it is charging
emits smoke, an unusual smell, feels hot or appears
abnormal in any other way:
– Immediately disconnect the charger from the outlet.
Contact the authorities in the event of fire or
explosion.
34

11 Maintenance, Repair and Storage

11 Maintenance, Repair and Storage

11.1 Warnings and Instructions

WARNING
￭ There are no user-authorized repairs for the battery,
charger or chain saw. To reduce the risk of fire, electric
shock or other personal injury and property damage:
– Users may carry out only the cleaning and
maintenance operations described in this manual.
Users must not attempt any other cleaning,
maintenance or repair.
– Strictly follow the cleaning and maintenance
instructions in the appropriate sections of this
instruction manual.
– STIHL recommends that all repair work be
performed by authorized STIHL servicing dealers.
￭ Unintentional starting may result in personal injury or
property damage. To reduce the risk of personal injury
and property damage from unintentional starting:
– Engage the chain brake by moving the
front hand guard forward to
remove the battery before inspecting the
chain saw or carrying out any cleaning,
maintenance or repair work, before
storing, and any other time it is not in
use.
￭ The bar and chain are the only user-serviceable parts of
the chain saw. Proper maintenance will help maintain
cutting performance and reduce the risk of personal injury
caused by chain derailment and reactive forces.
– Wear gloves when handling the saw chain.
– Keep the chain, guide bar and sprocket clean.
– Replace the chain and guide bar when they become
worn or damaged.
– Keep the chain sharp and at proper tension.
– Tighten all nuts, bolts and screws after each use.
and
0458-716-8621-D