Removing The Battery; Switching The Chain Saw On And Off; Switching On - Stihl MSA 120 C Manual De Instrucciones

Ocultar thumbs Ver también para MSA 120 C:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
► Place the chain saw on a level surface.
► Insert the battery (1) into the battery compartment (2) until
you hear an audible click.
In this position, the arrows (3) on the battery are still
visible and the battery is locked in the battery
compartment. There is no electrical contact between the
battery and the chain saw, however.
► To supply power to the chain saw, push the battery into
the battery compartment until it stops.
The battery is properly inserted when you hear a second
audible click and the battery is flush with the top of the
housing. In this position, there is electrical contact
between the battery and the chain saw.
Since a new battery is not fully charged, STIHL recommends
that you fully charge the battery before using it the first time,
@ 13.

17.2 Removing the Battery

WARNING
To reduce the risk of severe personal injury from unintended
activation, always remove the battery before assembling,
transporting, adjusting, cleaning, servicing, maintaining or
storing the chain saw and any other time it is not in use.
WARNING
Use care when ejecting the battery to prevent it from falling
and causing personal injury or property damage.
To remove the battery:
► Release the trigger switch.
► Place the chain saw on a level surface.
44

18 Switching the Chain Saw On and Off

► Press down on the locking lever (1) to eject the battery (2)
from the battery compartment.
NOTICE
Avoid exposing the battery to excessive heat or prolonged
periods of direct sunlight. Use or storage outside the
recommended ambient temperature range can reduce the
performance and/or service life of the battery.
18 Switching the Chain Saw On and Off

18.1 Switching On

WARNING
Never operate your chain saw if it is modified, damaged,
improperly adjusted or maintained, not completely and
securely assembled or not functioning properly, @ 6.4. To
reduce the risk of personal injury, always wear proper
clothing and protective apparel, including proper eye
protection, when operating your chain saw, @ 6.3.
When switching the chain saw on:
► Make sure you have a secure and firm footing.
► Stand upright.
2
1
0458-716-8621-D

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Msa 140 c

Tabla de contenido