DeWalt DWE46150 Manual De Instrucciones página 5

safety classthatis in compliance withyourlocaldusthazard
control regulations.
_WARNING: Always wear proper personal hearing protection.
Under some conditions and duration of use, noise from this product
may contribute to hearing loss.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
COMPONENTS (FIG. 1)
A WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Dust port E. Edging door
B. Clamp adjusting screw F. Edging door tab
C. Replaceable brush skirt G. Clamping lever
D. Brush skirt removal hole
FIG. 1
A
E
D
C
INTENDED USE
Your concrete surface grinding shroud has been designed for dust
removal of the following: grinding, leveling and polishing concrete
surfaces. It can remove dust when removing surface paint, epoxy
and glue. Using the appropriate grinder, diamond grinding wheel and
dust extractor vacuum it can be used to remove the vast majority of
static and airborne dust which without the use of the surface grinding
shroud could otherwise contaminate the working environment or pose
an increased health risk to the operator and those in close proximity.
This concrete surface grinder should ALWAYS be used with a dust
extractor vacuum designed for concrete dust removal.
DO NOT use under wet conditions or in presence of flammable liquids
or gases.
The surface grinding shroud is a professional tool. DO NOT let
children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
Recommended power tools to be used with this attachment are
available at extra cost from your local dealer or authorized service
center. If you need assistance in locating any power tool, please
contact DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore,
MD 21286, call 1-800-4-DEWALT (1-800-433-9258) or visit our
website www.dewalt.com.
ASSEMBLY (FIG. 1, 2)
AWARNING: To reduce the risk of injury, ALWAYS turn off the
tool and disconnect the tool from the power source before
making any adjustments or removing or installing attachments
or accessories. This applies to both the grinder and the dust
extractor vacuum. Such preventative safety measures reduce the
risk of starting the tool accidentally.