Bluewheel HK400 HOVOKART Manual De Instrucciones página 15

10
Insert the steering wheel tube (# 10)
into the handlebar (# 3) and secure it
with the quick release (# 14).
13
Pull the straps (# 9) through the eyelets
from the opposite side and attach the
velcro fastener.
11
Attach the steering wheel (# 7) to the
steering wheel tube (# 10) with the
M5 * 10 bolts and nuts.
14
Steering axle (# 4) Forward and back-
ward movement: Use the screw below
the balancing point to set the balance
point of your hoverboard. This must
be in rest position.
The Hovocart is now ready for ride.
12
Place the Hovokart frame in the center
of the hoverboard. Loosen the nuts on
the brackets and adjust them to the
width of the treads (then tighten).
15
Steering axle (# 4) LEFT-RIGHT motion:
Set the lateral balance using the four
outer support feet. This must be in rest
position.
15