Tripp-Lite SRCOOLDXRW12 Manual De Instalación página 10

3. Condenser Installation (Outdoor Unit)
Anchor the condenser using expansion bolts according to the hole locations shown in the "Condenser Mounting Interface"
figures below.
17.6 in.
(447 mm)
3.9 in.
(99.1 mm)
Figure 3-5: Condenser Mounting Interface (bottom view looking up), SRCOOLDXRW12
Figure 3-6: Condenser Mounting Interface (condenser inlet side looking up), SRCOOLDXRW25 (horizontal installation)
23.6 in.
(599.4 mm)
31.5 in.
(800.1 mm)
48.5 in.
(1231.9 mm)
44.3 in.
(1125.2 mm)
10
12.8 in.
(325.1 mm)
13.3 in.
(337.8 mm)
3.9 in.
(99.1 mm)
33 in.
(838.2 mm)
37.1 in.
(924.3 mm)