Celestron STARSENSE EXPLORER 10 DOBSONIAN Guía De Configuración Rápida página 6

13
A2
13. Install the cosmetic knob (N2) through the slot in the right side
panel (A2) and into the threaded insert in the center of the side
hub on the optical tube assembly.
15
15. Install the StarPointer red dot fi nderscope (Q) onto the
optical tube assembly. First, loosen the thumbscrew on the
fi nderscope holder. Insert the base of the StarPointer into the
holder and tighten the thumbscrew.
6 I ENGLISH
N2
Q
14
P
14. Install the StarSense dock (P). First, loosen the 2 thumbscrews
on the StarSense base on the tube. Insert the dock into the
base, and then retighten the thumbscrews.
16
S
16. Loosen the thumbscrews on the end of the focuser and
insert the 2" extension tube (S) into the focuser. Retighten
the thumbscrews.
THUMB SCREWS