Celestron STARSENSE EXPLORER 10 DOBSONIAN Guía De Configuración Rápida página 7

17
17. Loosen the thumbscrews on the 2" extension tube (S)
now installed in the focuser and insert the 2"-to-1.25"
eyepiece adapter (T). Retighten the thumbscrews on the
2" extension tube.
Your StarSense Explorer Dobsonian is now fully assembled and ready to be used.
Downloading and
Activating the App
Moving the
Telescope
T
S
1
1. Before you take your telescope outside,
download the StarSense Explorer app to your
mobile device. Search for "Celestron StarSense
Explorer" in the Apple App Store or Google Play.
The app is large, so we recommend downloading
it while connected to Wi-Fi.
1
1. The StarSense Dobsonian telescope moves
freely in altitude (up-and-down) and azimuth
(left-to-right). Simply move the tube by
pushing it in the desired direction. You can use
the knob handle at the front of the telescope
for a hand grip.
18
18. Loosen the thumbscrews on the 2"-to-1.25" eyepiece
adapter (T) now installed in the focuser, place the 25mm
Omni Plössl eyepiece (R1) into the adapter, and retighten the
thumbscrews on the adapter.
2
2. Once you have downloaded the app, locate the
orange postcard in your telescope box. Launch
the app. When prompted, enter the activation
code on the postcard to activate the app. Your
code will unlock up to 5 devices.
2 2 2
2. If the altitude motion moves too freely, or the
telescope moves up or down with no force being
applied tighten the altitude tensioning knob.
Conversely, if it takes much force to move the
telescope upwards or downwards, then loosen
the knob.
R1
T
Download the app from the or
before your first observing session .
When prompted, enter the unique unlock code below to
enable telescope control on your device.
ENGLISH I 7