Publicidad
FT 008-400
Dear Customer,
thank you for choosing our product. In order to get the best performances in the use of this product, please
read carefully this manual.
To avoid incorrect operations of the equipment and possible physical risks to the operator, please read and
strictly follow the instructions contained in this manual. Note, these instructions are in addition to the safety
rules that apply in the country where the filter is installed.
This manual must be maintained available in any moment for future references and it has to be
intended as inherent part of the relevant filter.
Due to the continuous technical evolution, we reserve the right to introduce any necessary change without
giving previous notice.
Should you experience any trouble, or for further information, please do not hesitate to contact us.
Filtration grades and applications
The filters of the FT series are used for filtering small solid particles and removing water and oil condensate
from compressed air and gas.
Filter grade
Characteristics
Filter capable to separate
C Series
condensate in compressed
air systems.
Filter capable to separate
P Series
emulsion and particles down
Green
to 3 micron.
Filter capable to separate
particles down to 1 micron,
S Series
liquid
Red
Maximum
residual oil 0,1 mg/m3.
Oil removing filter capable to
separate residual oil and
X Series
extremely
Yellow
down to 0,01 mg/m3. It
produces air technical free
from oil.
Activated carbon filter for the
elimination of oil vapours and
Z Series
odour. When installed after a
Black
(X) grade filter, it lowers the
maximum contents of residual
oil to 0,003 mg/m3.
and
oil
included.
contents
of
small
particles
Installation
example
Normally
condensate
installation downstream of the final refrigerants
or upstream of the pre-filter (C-P series) is
recommended.
Normal installed on the inlet of dryers. Ideal as
pre-filter for on-line filters (series S-X-Z), and for
vacuum pumps, pneumatic blowing plants.
P
Normally used on outlet of dryers as (X) grade
pre-filter. Used to prevent the deterioration of the
pipes of compressed air plants, for surface
P
S
treatment, on vacuum pumps exhaust, on
compressed air motors, and as post-filter for
S
adsorption dryers.
Used for the protection of control system,
pneumatics haulage, painting system and as pre-
filter for adsorption dryers.
P or S
X
Used in the pharmaceutical industry, for dental
applications, in photographic workshop, packaging
and galvanic treatments.
P or S
X
Z
Application example
used
in
applications
separation
is
required.
-EN-
where
Its
Publicidad
