Operation; Cleaning; Storage; Troubleshooting - Clatronic FW 3151 Manual De Instrucciones

Operation

WARNING: Risk of Injury!
Always use the supplied tamper. Never insert your fingers
or tools into the filling neck!
CAUTION:
Do not use the appliance for longer than 10 continuous
minutes. Let it cool for 10 minutes before using it again.
WARNING:
• Always pull the power supply plug before cleaning and wait until
the appliance has cooled down.
• Never immerse the motor assembly in water for cleaning. It
could result in an electric shock or fire.
• The blade of the meat grinder is sharp! There is a risk of injury!
Proceed carefully when disassembling, cleaning and assem-
bling the individual parts.
CAUTION:
• Do not use any wire brush or other abrasive objects.
• Do not use any acidic or abrasive detergents.
Motor Assembly
Only wipe the motor assembly with a damp cloth and dry
with a dry cloth after.
Filling Tray, Spiral, Spiral Housing and all Accessories
CAUTION:
Do not clean these parts in the dishwasher. The surfaces
could become lacklustre.
• Use a little dishwashing liquid and clean these compo-
nents in warm rinsing water.
• Rinse with clear water and dry the parts.

Storage

• Clean the appliance as described. Let the accessories
dry completely.
• We recommend that you store the appliance in its
original packaging when it is not to be used for a longer
period.
40
FW3151_IM_new
1. Put the pieces of meat (meat paste / sausage mass or
dough) on the filling tray and into the filler neck.
2. Stuff, if necessary, the meat respectively the dough with
the tamper (1).
Ending Operation
1. Disconnect the power plug.
2. Disassemble all parts of the meat grinder.
3. Clean the parts used as described under "Cleaning".

Cleaning

• Always store the appliance at a well ventilated and dry
place outside the reach of children.
• Regularly coat the steel discs with vegetable oil.
Problem Possible Cause Remedy
The appliance The appliance
does not has no power
function. supply.
The appliance is
faulty.
The function
switch (4) is set
to "II".

Troubleshooting

Check the socket with
another appliance.
Plug in the mains plug
correctly.
Check the main circuit
breaker.
Contact our service
centre or a specialist.
Set the function switch
to "I".
24.08.21