Oster FPSTJE4000R Manual De Instrucciones página 27

D ISASS E M B L IN G , C LE A N ING A ND CA R E
1.
Before disassembling and cleaning your juicer, ensure that the motor has stopped
completely and unplug the power cord.
• When unplugging the power cord, hold the plug firmly. Do not touch the power cord or
plug with wet hands.
2.
Hold the base with one hand and turn the hopper counterclockwise aligning the unlock
symbol " " on the hopper with the arrow "
up to remove it.
3.
Disassemble the parts indicated below:
1) Take the auger out.
2) Remove the strainer.
3) Take the spinning brush out.
4.
Rinse each part with the cleaning brush and brush the inside and outside under running water.
• Never use scouring pads, abrasive cleaning agent, aggressive liquids or sharp
cleaning tools.
• Do not clean parts in a dishwasher.
5.
Wipe off stains on the base with a soft damp cloth or wrung-out towel, and dry thoroughly.
• Do not immerse the motor base in water or any other liquid, or rinse it under the tap.
6.
After each cleaning, allow appliance to air-dry completely and store in a clean, safe place.
• Always wash the chamber set immediately after each use. Without washing, leftover
pulp dries and sticks to parts. This makes disassembly difficult, and may cause
degradation in performance.
" on the top of the base then lift the hopper
En gl is h-10