Oster FPSTJE4000R Manual De Instrucciones página 31

ASSEMBLING THE CHAMBER SEAL
1.
Hold the chamber seal by pinching it between the thumb and index finger.
As shown to the left in the dotted circle, let the protruding part on the chamber seal face
upward when you hold it by pinching it between the thumb and index finger.
2.
Insert the chamber seal into the chamber hole.
Insert the bottom of the chamber seal into the chamber hole and press it down fully. Do not
insert the entire chamber seal. The upper part of the chamber seal must stay above the
chamber hole.
3.
Turn over the chamber and settle the chamber seal into place.
If the chamber seal at the bottom of the chamber is not fully installed, set it into place
properly with the rotating pick on the end of the cleaning brush.
Chamber
Seal
Chamber
Seal
En g lish -1 4