Movement TOURS Manual Del Propietário página 102

MAINTENANCE
SERIAL NUMBER
The serial number contains information pertaining to the
equipment class and the manufacturer's data. Do not
remove the number series sticker as this provides
information for the authorized dealer and for the
manufacturer. If the sticker with the serial number peels off,
contact the manufacturer immediately.
TROUBLESHOOTING
FAILURE
NO DISPLAY ON CONSOLE
NO HEART RATE SIGNAL
RPM OR HEART RATE DO NOT
CHANGE
CADENCE NUMBER JUMPS
HIGH OR LOW
HEART RATE SIGNAL IS
INTERRUPTED OR FAILS
1 - Press any key to bring the console into fast
mode.
2 - Ensure that the batteries are correctly
mounted on both the console and the speed
sensor. If it still does not work, install new
batteries.
1 - Check that the chest strap has been placed
correctly at chest height, or that there is
moisture between the electrodes of the chest
strap.
2 - Move the spinning away from electronic
devices such as TV, DVD and other devices that
may interrupt the frequency.
1 - Press the 'MODE' key repeatedly to change
between SPEED (SPD), DISTANCE (DIST),
TIME (TIME) AND CLOCK (CLK).
2 - Press and hold the 'PAGE' key to clear any
type of data that is recorded.
1. Separate bikes that may be paired to the
same console code and are cross-talking, or
simply run transmitter pair stage again on the
bike.
2. Relocate the bike to a different part of the
room, away from any RF interference areas.
1 - Make sure that the minimum distance
between the equipment is 91 cm.
2 - Check that the chest strap is properly
placed on the chest and that the electrodes are
in contact with the skin.
47
ACTION