Beacon Lighting LUCCI AIRFUSION PEREGRINE Manual De Instrucciones página 6

Airfusion Peregrine Installation Instructions
INSTALLATION OF Bottom cover (Fig. 10)
• If no lamp is required, Install the bottom cover to the fan assembly then secure it by turning clockwise.
INSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 11)
1. Locate a suitable wall to fix the remote control holder with the 2 screws. (Fig.11a).
2. Slide the remote into the holder to rest the remote. (Fig. 11b)
Complete the electrical wiring according to the 'ELECTRICAL WIRING DIAGRAM' section below. (Fig.12)
⚫
Noted: The Peregrine fan is a DC technology fan and cannot be used with an AC wall switch. If use wall
switch, on/off toggle wall switch – only, Always leave in the "on" position and use remote.
5 | P a g e
Fig. 11a
Fig. 10
Fig. 11b