Preparing The Cassette Tank - Dometic CT 4110 Instrucciones De Uso

Using the toilet
6.2

Preparing the cassette tank

Removing the cassette tank
Proceed as follows (fig. 3, page 4):
➤ Open the service door.
➤ Push the catch upward to unlock the cassette tank.
➤ Pull the cassette tank out of the cassette housing. When pulling out the tank,
resistance has to be overcome.
Adding sanitary additive
➤ Position the cassette tank upright.
➤ Rotate the drain pipe approx. 90° upward (fig. 4, page 4).
I
NOTE
Avoid turning the drain pipe more than 90°, as it otherwise can come off
(fig. 4, page 4).
➤ Twist off the cap (fig. 5, page 5).
➤ Add sanitary additive into the cassette tank via the drain pipe (fig. 6, page 5).
Observe the instructions for the sanitary additive.
Pushing the cassette tank into the cassette housing
A
NOTICE!
Ensure that the cassette tank can be pushed into the cassette housing
easily. Make sure that the cassette tank does not bump into other
objects or components.
➤ Slide the cassette tank all the way into the cassette housing.
✓ The cassette tank lock locks by itself upon being pushed in.
➤ Check that the cassette tank is securely installed.
➤ Close and lock the service door.
22
CT4110, CTS4110
EN