Fan Heater - Taurus Alpatec TROPICANO S2001 Manual De Instrucciones

English

Fan Heater

Tropicano S2001
DESCRIPTION
A Function and speed selector
B Thermostat rotating switch
C Pilot light
D Carry handle
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if the on/off switch
does not work.
- Do not move the appliance while in use.
- Use the appliance handle/s, to catch it or move
it. (Fig.1)
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- If you use the appliance in a bathroom or similar
place, unplug the appliance from the mains
when it is not in use, even if it is only for a short
while, as proximity to water involves a risk, even
if the appliance is disconnected.
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach of
children and/or the disabled.
- Keep the appliance in a dry, dust-free place, out
of direct sunlight.
- Make sure that dust, dirt or other foreign objects
do not block the fan grill on the appliance.
- Never leave the appliance unattended while in use.
- Never leave the appliance connected and unat-
tended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any
kind.
- WARNING: Do not sleep while using this
appliance, as there is risk you could be harmed.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron
is switched off permanently.
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Ensure that the appliance is level with respect
to the floor.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Some parts of the appliance have been lightly
greased. Consequently, the first time the
appliance is used a light smoke may be detec-
ted. After a short time, this smoke will disappear.
- Prepare the appliance according to the function
you wish to use.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the diffuser of the appliance to direct the
flow of air in the desired direction.
- Turn the appliance on, by using the function and
speed selection control.
- The pilot light (C) comes on.
- Select the function you want the appliance to
carry out.
- Select the desired speed.
- Turn the thermostat control to the desired tem-
perature position.
- During use the pilot light (C) will automatically
flash on and off, thus indicating that the heating
elements are operating in order to maintain the
desired temperature.
FAN FUNCTION:
- Select the fan position.
- Check that the thermostat button is set to the
maximum.
HEAT FUNCTION:
- Select the desired heating power.
- Check that the thermostat control is set to the
temperature required
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the