Choosing A Location; Transporting The Compressor - Invacare HomeFill II Manual De Instrucciones

Invacare® HomeFill® II

3.3 Choosing a Location

WARNING!
– NEVER use near any type of flame or
flammable/explosive substances, vapors or
atmosphere.
– Keep the oxygen tubing, cord, and unit away from
heated or hot surfaces, including space heaters,
blankets, stoves and similar electrical appliances.
The compressor should be at least three inches away from walls,
draperies or furniture to ensure sufficient air flow and clearance for
the power cord.
DO NOT use in a closet.
The compressor should sit on a hard flat stable surface, such as a
table or the Ready Rack.
The HomeFill Ready Rack is sold separately and used to
position the HomeFill compressor on top of a Perfecto
oxygen concentrator. Refer to the HomeFill Ready
Rack instruction sheet part number 1148363, for more
information.
14
All manuals and user guides at all-guides.com

3.4 Transporting the Compressor

2
There are two methods to safely transport the compressor:
1.
2.
WARNING!
– NEVER transport a compressor with a cylinder
connected to or stored on the compressor, otherwise
injury or damage can occur.
CAUTION!
– When transporting the compressor, be careful not
to bump the compressor or the connectors into
obstacles. Otherwise, damage to the compressor may
occur.
One hand - Grasp the hand grip A at the bottom rear of the
compressor.
Two hands - Grasp the hand grips B on the sides of compressor.
1145804-E