Cleaning The Filter Screen - Kohler K-18751-0 C3-050 Guía De Propietario

Cleaning the Filter Screen

CAUTION: Risk of product damage. Do not cross-thread the hose connection to the inlet.
NOTE: Clean the filter screen every 6 months or when there is a reduction in the maximum water flow from the spray
wand.
Turn OFF the water at the supply stop.
Flush the toilet to relieve water pressure.
Unplug the power cord from the electrical outlet.
Disengage the seat from the mounting bracket. Refer to the "Removing the Seat" section.
Rotate the inlet downward.
Disconnect the water line from the white inlet port on the seat.
Using long-nosed pliers, carefully remove the filter screen from the inlet.
Clean the filter screen with a soft-bristled brush.
Reinstall the filter screen.
Reconnect the water line to the inlet, one-quarter turn past hand-tight.
Rotate the inlet upward.
Reinstall the seat.
Plug the power cord into the electrical outlet.
Turn ON the water supply.
Check all connections for leaks, and make adjustments as needed.
1441873-5-C
8 Kohler Co.