Twin Spinner Spread Pattern Troubleshooting Guide - TYCROP ProPass 180 Top Dresser Manual Del Operador

Twin Spinner Spread Pattern
Troubleshooting Guide
If you are having problems with the ProPass spread
pattern:
1. Adjust the ProPass and the Twin Spinner option
to the factory recommended settings.
Spread Pattern
Heavy in the middle Slowing the Twin Spinner speed may help
throw the spread pattern more to the
outside.
Loosen the adjustment handle and slide the
base of the twin spinner towards the
ProPass 3 to 6.5 mm (1/8 to 1/4 inch). Test
the spread pattern.
Heavy line down center Adjust disc setting from A to B.
Heavy to the outside Loosen the adjustment handle and slide the
base of the twin spinner away from the
ProPass 3 to 6.5 mm (1/8 to 1/4 inch). Test
the spread pattern.
Towards the ProPass
Operating Instructions
All manuals and user guides at all-guides.com
TYCROP Manufacturing Ltd.
Adjustment
ProPass 180 Top Dresser Operator's Manual
2. Replace all worn spinner disks or paddles.
3. Test the spread pattern.
4. Use the following troubleshooting guide to make
small adjustments and refine the spread pattern.
5. If you are still having problems with the spread
pattern, contact an authorized TYCROP
distributor.
Next Step
Keep repeating this step until the spread pattern
is acceptable.
If the spread pattern is still not acceptable,
contact an authorized TYCROP distributor for
additional adjustment procedures.
No next step required
Keep repeating this step until the spread pattern
is acceptable.
If the spread pattern is still not acceptable,
contact an authorized TYCROP distributor for
additional adjustment procedures.
Away from the ProPass
Page 31