How To Lubricate The Propass; Lubrication Schedule; Lubrication Procedure - TYCROP ProPass 180 Top Dresser Manual Del Operador

: Be patient! Do not over-tension the belt.
I
MPORTANT
6. Install both of the yellow safety covers.

How to Lubricate the ProPass

Lubrication Schedule

•
Use an automotive, all-purpose grease.
•
Lubricate regularly, after 25 hours of normal
operation.
•
Lubricate daily when operating in extremely dusty and
dirty conditions.
•
Lubricate all bearings, bushings, and chains.

Lubrication Procedure

Several grease fittings are located on the ProPass and the
tow-behind chassis, and one on the Vortex Brush option.
Look for the universal grease point decals (TY-410); also
see Figure 36 through Figure 39.
1. Clean the grease fittings.
2. Pump the grease into the bearings and the bushings.
3. Clean off the excess grease.
4. Clean and repack the wheel bearings every year or
every 300 hours of operation.
Figure 36: Grease fitting on Base Model
(one at left front, one at right front)
Maintenance Instructions
All manuals and user guides at all-guides.com
TYCROP Manufacturing Ltd. ProPass 180 Top Dresser Operator's Manual
Figure 37: Grease fitting on Base Model
(one at left rear, one at right rear)
Figure 38: Grease fitting on tow-behind chassis
(front and rear, left and right). Grease once per year.
Figure 39: Grease fitting on Vortex Brush
Page 35