Transport And Storage - HEROSE 06401 Instrucciones De Servicio

NOTICE
Impermissible stress due to operating conditions and extensions / added structures.
Valve body leaking or broken!
Provide suitable support.

Additional loads, such as traffic, wind or earthquakes, are not explicitly taken into account by

default and require separate sizing.
Condensation in air conditioning, cooling and refrigeration plants.
Icing!
Blocking of the actuation mechanism!
Damage due to corrosion.

Insulate the valve with diffusion-tight material.

Improper mounting.
Damage to the valve!
Remove cover caps before mounting.

Clean the sealing surfaces.

Protect the body against hammering.

Painting of valves and pipelines.
Impairment of the function of the valve / loss of information!
Protect stem, plastic parts and type plate against the application of paint.

Impermissible stress
Damage to the control mechanism!
Do not use the valve as a foothold.

Exceeding the maximum permissible operating conditions.
Damage to the valve!
The maximum permissible working pressure must not be exceeded, and the minimum and

maximum allowable working temperatures must be observed.
Particles and other contaminants in the conveyed medium.
Damage to the valve / internal leak!
Remove particles/contaminants from the conveyed medium.

It is recommended to install strainers / dirt filters in the pipework system.

Safety instructions for installed safety valves
DANGER
Hazardous medium.
Escaping operating medium can lead to poisoning, burns and caustic burns!
Wear the prescribed protective equipment.

Provide suitable collecting containers.

Stand to the side of or behind the safety valve during lifting.

The outlet must be free.

Flammable media and dusts
Risk of sustaining burns!
Avoid potential sources of ignition in the immediate vicinity of the safety valve.

Attach warning signs.

Risk of injury due to pressure
Injury due to the safety valve being flung away!
Depressurise and empty all inlet lines before dismounting the valve.

Make sure that the system is depressurised.

Secure against being pressurised again.

Do not bend over the safety valve when dismounting.

3

Transport and storage

3.1 Inspection of condition on delivery
Inspect the valve for damage upon receipt.

In case of transport damage, determine and document the precise extent of the damage, and
report it immediately to the supplying dealer/carrier and the insurer.
Operating instructions
herose.com
15