Baxtran ABD Manual De Instrucciones página 41

VELOCIDAD DEL CONVERTIDOR AD
SPEED 1 standard speed 15Hz.
SPEED 2 high speed 30Hz.
SPEED 3 low speed 7.5Hz
*This function stays blocked when UF-5 is in mode HOLD 1.
*The value of factory is 1
DISPLAY
LF4
•Press the key
again automatically.
SPEED 1
•Use the key
to exit from the configuration and go back to the menu LF4)
LF 4
•Use the keys
BLIND
LF 5
DISPLAY
ZP 0 OFF
LF 5
ZP 1 One division will not show being at zero
ZP 2 Two division will not show being at zero
ZP 3 Three divisions will not show being at zero
ZP 4 Four divisions will not show being at zero
ZP 5 Five divisions will not show being at zero
*This function is going to be blocked when UF-5 is in mode HOLD 1
*The value of factory is ZP 0
DISPLAY
LF 5
• Press the key
automatically.
ZP 0
• Use the key
ESC to exit from the configuration and go back to the menu LF4)
LF 5
• Use the keys
LF 4
DESCRIPTION AND SEQUENCE OF USE
to start or the key
and then the key
, and then
to exit from the menu and the scale will start again automatically.
DESCRIPTION AND SEQUENCE OF USE
DESCRIPTION AND SEQUENCE OF USE
to start or the key
and the key
, and then the key
to exit from the menu and the scale is going to start automatically.
to exit from the menu and the scale is going to begin
to select the speed of the AD converter ( press the key
. To continue with the other adjustment and press the key
to exit from the menu and the scale will start again
to select how many divisions will show when in zero ( press
to continue with other adjustment or press the key
USER'S MANUAL ABD EN EN
41