3M EXOFIT NEX Instrucciones página 2

;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M
Technical Services for updated instruction manuals.
;
This product should not be used without first consulting the instruction manual for the ExoFit NEX™ Harness (5903027).
meets nFpa 1983
1112973 1113371B
1112974 1113371C
1113283 1113372
1113283C 1113372B
1113284 1113372C
1113284C 1113373
1113289 1113373B
1113289C 1113373C
1113304 1113699C
1113304C 1113700C
1113345 1113701C
1113345B 1113702C
1113345C 1114000
1113346 1114000H
1113346B 1114001
1113346C 1114001H
1113347 1114002
1113347B 1114002H
1113347C 1114003
1113348 1114003H
1113348B 1114007
1113348C 1114007H
1113370 1114011
1113370B 1114011H
1113370C 1114012
1113371 1114012H
1.0 PRODUCT APPLICATION
1.1 purpoSe: ExoFit NEX Harnesses may be used in a variety of Fall Protection applications. This supplemental instruction
describes how to don the ExoFit NEX Suspension Harness and how to adjust the harness for use in Work Positioning and
Rescue applications. This supplemental instruction also includes additional instructions for donning and fitting the Class II
and Class III Fire and Rescue Suspenion Harnesses. See the instruction manual of the ExoFit NEX Harness (5903027) for
more information on system applications.
1.2 StanDarDS: This instruction manual applies to the harness models listed in Table 1. Harness models are grouped
in Table 1 per the status of their NFPA certification. For more information on the NFPA standard, refer to the life safety
harness information found in NFPA 1500 ("Standard on Fire Department Safety and Health Program") and NFPA 1983
("Standard on Life Safety Rope and Equipment for Emergency Services"). For more information on ExoFit NEX Suspension
Harness certifications, refer to the manufacturer instructions (5903027).
1.3 enVIronmental HaZarDS: Do not expose the harness to flame or high temperature. Such exposure could cause the
harness to melt or burn and fail during use. Harnesses that meet the optional flame resistance requirements specified in
NFPA 1983 are designed for use in environments where exposure to flame or high temperature could occur.
2.0 HARNESS USE
2.1 DonnInG anD FIttInG tHe SuSpenSIon HarneSS: The ExoFit NEX Suspension Harness may be used in Work
Positioning applications. Don the ExoFit NEX Suspension Harness using the following steps. See Figure 2 for reference.
1. Locate the front of the harness. The front has two D-rings. Lift up the harness and hold by the shoulder straps. Ensure
all straps are not twisted.
2. With the front of the harness facing forward, step through the right side of the harness with your right leg. Then, step
through the left side of the harness with your left leg. Grasp the right shoulder strap and place it on the top of your
right shoulder. Ensure that the straps are not tangled and hang freely.
3. Grasp the left shoulder strap and place it over your left shoulder. The two D-rings will be positioned on the front of your
body if the harness has been donned properly.
4. Grasp the tab of the buckle located at the bottom of the strap that you placed over your left shoulder. Insert the tab
into the receptor of the quick connect buckle on the left side of the harness. You will hear a click when the tab engages
properly.
5. Grasp the waist-level strap ends on right and left sides of the harness. Pull both ends forward until all slack is removed
from the waist strap and the strap is comfortably tight around your waist. Insert strap ends into the waist strap keeper
loops on the right and left sides of the harness.
table 1 – model list
meets nFpa 1983
+ optional Flame
requirements
1114013 1114004
1114013H 1114004H
1114014 1114005
1114014H 1114005H
1114030 1114006
1114031 1114006H
1114032 1114008
1114033 1114008H
1114034 1114009
1114035 1114009H
1114036 1114010
1114037 1114010H
1114056 1114058
1114057 1114058H
1114059
1114059H
Not Certified to NFPA
1113557 1113570
1113557C 1113570C
1113558 1113571
1113558C 1113571C
1113559 1113572
1113559C 1113572C
1113560 1113573
1113560C 1113573C
1113561 1113574
1113561C 1113574C
1113562 1113575
1113562C 1113575C
1113563 1113576
1113563C 1113576C
1113564 1113577
1113564C 1113577C
1113565 1113578
1113565C 1113578C
1113566 1113579
1113566C 1113579C
1113567 1113580
1113567C 1113580C
1113568 1113590
1113568C 1113590C
1113569 1113591
1113569C 1113591C
2
1113644 1113657
1113644C 1113657C
1113645 1113658
1113645C 1113658C
1113646 1113659
1113646C 1113659C
1113647 1113660
1113647C 1113660C
1113648 1113661
1113648C 1113661C
1113649 1113662
1113649C 1113662C
1113650 1113663
1113650C 1113663C
1113651 1113664
1113651C 1113664C
1113652 1113665
1113652C 1113665C
1113653 1113666
1113653C 1113666C
1113654 1113667
1113654C 1113668
1113655 1113668C
1113655C 1113669
1113656 1113669C
1113656C