Functional Description - Makita M6200 Manual De Instrucciones

7. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
8. Some material contains chemicals which may
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
Symbols
The followings show the symbols used for tool.
･
volts
･
amperes
･
hertz
･
alternating current
･
no load speed
･
Class II Construction
･
revolutions or reciprocation per minute
USD201-2
Скачано с сайта интернет магазина https://axiomplus.com.ua/

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and unplugged
•
before adjusting or checking function on the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For model M6200
CAUTION:
Switch can be locked in "ON" position for ease of operator
•
comfort during extended use. Apply caution when locking
tool in "ON" position and maintain firm grasp on tool.
2
015013
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For model M6201
CAUTION:
Change the direction of rotation only when the tool
•
comes to a complete stop. Changing it before the
tool stops may damage the tool.
1
2
3
015014
4
1. Lock button
2. Switch trigger
1
1. Switch trigger
2. Counterclockwise
3. Clockwise