Publicidad
Idiomas disponibles
Idiomas disponibles
Transmitter
The Merlin MTX-41 Transmitter is an advanced controller designed for the beginner to be easy to use and tune. You will need to follow the steps
below to ensure you prepare the controller correctly for use and understand the adjustment possibilities available.
Preparing the transmitter
8
2
5
13
Throttle Stick
1.
1
2.
2
Rudder Stick
1.
2.
1
2
Open the battery holding tray to
expose the empty battery slots.
Insert 8 AA batteries into the
marked spaces. Please note the
correct direction of the batteries
Incorrect battery insertion could
lead to damage
1
4
6
3
7
9
10
11
12
Elevator Stick
Push the stick forward
to increase propeller
speed
Pull the stick back-
wards to
decrease
propeller speed
Push the stick left to turn
left, rudder moves left
Push the stick right to
turn right, rudder moves
right
4
Insert the aerial into the hole and
turn clockwise until it is tightly
secured.
Make sure you never over extend
the aerial as this will cause it to
break.
1.
Aerial
2.
Throttle Trim
3.
Rudder Trim
4.
Elevator Trim
5.
Throttle Stick
6.
Rudder/Elevator Stick
7.
Power Switch
8.
Battery level indicator
9.
Not Used
10.
Rudder reverse switch (labelled AIL)
11.
Throttle reverse switch
12.
Elevator reverse switch
13.
Frequency Crystal
1.
Push the stick forward to
lower the nose, elevator
1
moves down
2.
Pull the stick backwards to
raise the nose, elevator
moves up
2
Publicidad
